Skull Shaver Pitbull Platinum PX5 Review: An Upgrade With Minimal Extra Features
The Skull Shaver Pitbull Platinum PX5 sits right near the top end of Skull Shaver’s lineup. When Skull Shaver rolled out their upgraded X5 series in 2025, I was looking forward to seeing what actually changed and if the changes were significant.
Unlike the Skull Shaver Palm upgrade to MX5, which brought some pretty noticeable performance and feature upgrades, the Platinum PX5 upgrade from the Platinum Pro is primarily about accessories.
We get an upgraded hard travel case and improved IPX7 waterproofing. But when it comes to shaving performance, I found no difference between this new PX5 model and the older Platinum Pro.
At a retail price of around $200 USD, this is an extremely expensive head shaver. When most of the top-performing shavers on my best head shavers roundup cost anywhere from $50 to $120, the Platinum PX5 really needs to prove it’s worth that extra $100 price tag.
In this review, I’ll share my thoughts and experince on the design and features, compare the new PX5 to the older Platinum Pro model, stack it against the Pitbull Gold GX5, and share how it actually performs on my balding bonce.
Skull Shaver Platinum PX5 vs. Older Platinum Pro (What’s New?)
If you already own the previous Skull Shaver Pitbull Platinum Pro, you might be wondering if it’s time to upgrade. Here is how the 2025 PX5 compares to the older version.
| Feature / Metric | Older Platinum Pro | Upgraded Platinum PX5 (2025) |
|---|
The Skull Shaver website states that the Gold Pro GX5 version and Silver Pro SX5 got a motor upgrade in performance. I actually felt like the Gold GX5 was slightly quicker, and the motor sounded slightly faster (slight, this was). However, Skull Shaver does not state that the Platinum PX5 got a motor upgrade, and when I put them side by side, I found no difference in speed or motor sound.
For the PX5, we are looking at the waterproofing being upgraded and a better travel case, basically.
My guess is the pre-X5 series, including this Platinum Pro, will be phased out eventually.
Design and Ergonomics
An aspect of Skull Shaver’s design that is unique and patented is the ability to hold it in with a cupping method. We can hold it while shaving in two ways.
Design & Ergonomics Ratings
The rectangular handle block features deep finger grooves on the underside and enough space between the body of the shaver and the cutter head to fit my hand perfectly, and then cup my fingers for a firm grip. I’ve come to really appreciate this method of holding, and I can kind of get most of the shave done, not just the back of my head, with that method.
We can still hold the shaver on its sides, as that area also has grooves. I find using it at the sides useful if I want to add more pressure on the sides of my head.
The compromise of this design is height, as I view it. Because of the open cupping channel under the body, the shaver is taller and blockier than palm-ball shavers (like the Remington Balder Pro/RX5 – Balder Boss/RX7 series), which fit more naturally into the center of a closed palm.
If you prefer a more compact “ball-type” head shaver, the Skull Shaver design might feel big in the hand. For me personally, it’s not a problem — I’m so used to the Pitbull shape.
As for build quality, the main body feels solid in the hand, and it has a bit of weight to it. The chrome finish looks sleek out of the box. However, the outer casing of the removable 4-blade head assembly feels like lightweight plastic, which makes sense, as it needs to be replaced when the cutters are no longer shaving at their best.
Blades and Head Section
The PX5 uses four rotary cutters, which is a sensible number for a dedicated head shaver. I don’t think we necessarily need six or seven cutters just because another model advertises a higher number. The design and how well the cutters maintain contact with the scalp are more important.
Head and Blade Movement Ratings
The four blades flex inward together, and each individual cutter head flexes independently. I found this helps maintain solid skin contact throughout the entire shave, hugging the contours of the scalp.
Forte Blades
Skull Shaver offers a collection of various rotary-type blade heads, and the PX5 comes with what is known as Forte blades. Forte blades are said to be suited for most users, and the other two main types are Carver (for coarse hair) and Baron (for sensitive skin or fine hair). I have not tried the Baron blades yet, and when I compared the Carver with Forte, I found the Forte was maybe more comfortable.

One thing this shaver does not have is head flex. The neck connecting the blade head to the handle is completely solid. Some other models, like the Philips Head Shaver Pro (shown in the next clip), feature a neck joint that tilts, but in my experience with the Skull Shaver, the lack of neck flex doesn’t hurt performance much because the individual blade flexing does most of the contour work.
The whole head section can be removed. It is removed easily when turning the head, and I find it easy enough to slot back in (then turn it to lock it back into place). The main use for this would be for using attachments like the nose/ear trimmer that Skull Shaver sells – not included with the PX5.
We get a blade cap cover to protect the blades when it is not in use. These on the Skull Shaver can feel a bit too loose for my liking or can stick to the blade sides at times (I have had the blade head and cap cover coming off together when trying to remove just the cover).
Hair Collection Chamber
When we take the blade cap top off, it reveals a collection chamber underneath. I found this useful, and it does collect some of the debris, but not all of it, as some debris also gets caught in the cutters.

Battery, Charging, LEDs, and Travel Lock
The 90-minute runtime from the lithium-ion battery is more than enough. If I got 60 minutes, I’d be fine. I’ve used this shaver for multiple shaves already, and it’s still sitting at 83%.

Battery, Charging, and LED Ratings
The PX5 uses a proprietary Skull Shaver cable, USB Type-A (not USB-C), and the charging port has a removable rubberized cap to protect the shaver from potential water damage. We also get an adapter included, which I found useful.
I like that the PX5 can be used corded or cordless. There are not many shavers or grooming devices providing plugged-in use now. I also appreciate the long cable Skull Shaver provided, just in case it is required, and it shows they put some effort into soem of the finer details.

I really like having the digital battery percentage indicator on the top section. While basic LED lights get the job done, having the clear percentage display is a great feature to know exactly how much charge I have left.
To activate the travel lock, we press and hold the power button for about 9 seconds until the lock symbol appears. Hold it for another 9 seconds to unlock it. 9 seconds feels quite long for a travel lock, but it works well to prevent accidental turn-ons in transit if we are going away on a trip.
Cleaning and Maintenance
Cleaning the shaver is very simple, and I recommend wet cleaning and oiling it regularly to maintain cutter performance.
Cleaning & Maintenance Ratings
Here is my cleaning and maintenance routine:
- Pop open the top cap: Separate the top blade faceplate from the handle.
- Blow and brush out: Give the hair collection chamber a good blow and brush out loose stubble. Clear out the corners with a brush or tissue.
- Wash with soap: Apply a few drops of antibacterial liquid hand soap onto the cutters, snap the cap back on, run the shaver under warm water for 10 to 15 seconds, and rinse it out.
- Air dry: Take off the top cap and let the blades sit separate from the handle for a couple of hours to dry completely.
- Oil the cutters: Apply a couple of drops of blade oil to each of the four cutters (either on top of the foils or into the cutter ports underneath). Snap the cap back on and run the shaver for a few seconds to coat the blades. Take a tissue to wipe away any excess oil around the casing.
Lubricating after wet cleaning is definitely something I recommend to keep the cutters running smoothly and make them last longer.
A Change I Don’t Like: Cog No Longer Releases the Cutters
There is one change to the cutter design that I’m not particularly happy about.
When I remove the head, there is a cog inside the cutter assembly.
Previously, I could turn this cog and release the individual cutters, which made it much easier to give them a really deep clean.
Unfortunately, that’s no longer possible with this model and other recent Skull Shavers I used and reviewed.
I’d like to see Skull Shaver bring that feature back because I found it very useful for deep cleaning.
We also get the rinse stand, so this is another cleaning option. I seem to have preferred keeping my standard wet cleaning routine. However, the stand is good for letting the shaver sit while it is switched on with water flowing through it, and I have observed a lot of debris coming out from the cutters. It is worth giving it a go and seeing how you get on.
In the next clip, you’ll see me using the rinse stand, and because I use soap, you’ll see it still needs rinsing under the faucet as well to clean off suds. However, you would not need to do this if you used plain water.
Skull Shaver recommends replacing the blades every 3 – 6 months, but mileage will vary based on hair coarseness, how often we use the shaver, and caring for the blades.
Accessories
The Platinum Pro has only ever been a choice over the Gold Pro based on accessories and the shaver having a travel lock. That is still kind of the case with the Series X5 shavers, and it is a more travel-friendly option.

The travel case that I got with the PX5 is larger than what I got with the Platinum Pro, and I can fit more accessories inside. With the PX5 bundle I got, I found the additional room useful and necessary, but it is somewhat big for packing away for a trip.
The Gold Pro (GX5 model) now comes with the blue travel case that only came with the Platinum Pro previously. I can still fit the shaver, rinse stand, and adapter in the blue case, albeit a bit of a squeeze.

We get another small velvet pouch to store the shaver in, which is more of a travel-friendly option if we need to travel light and use less room in the luggage. This pouch will just store the shaver, cable, and adapter.

We also get a rinse stand (as shown in the cleaning and maintenance section above). I found it can be useful but not essential, as the shaver is easy to clean under the faucet. I have always quite liked using the stand as a place to sit the shaver, though, as it just sits in there nicely.

One PX5 kit that can be purchased includes the Carver 3 Head PRO Blade. This is the only Skull Shaver blade I have found I can get away with for facial shaving, as it fits areas of the face and neck better than the four rotary blade types. I’m still not much of a fan of facial shaving with a dedicated head shaver, but the option (imperfect) is available and made easier with the Carver 3 Head PRO Blade, if you need that.

Shaving Experiences
I used the PX5 for head shaving daily, every two or three days, and when it was over three days, I gave it a quick trim. I found that the PX5 and other dedicated head shavers are generally best used on short growth of no more than three days.

Contours – Staying Close to The Scalp
As expected and based on my experience with the other Skull Shaver models, the PX5’s blade system maintains continuous contact over the scalp throughout the entire shave (i.e., no overlap of blades not touching the head). The 4-blade assembly hugs the head smoothly without any of the uneven trailing edge or blade overlap that I’ve noticed on some rival head shavers.
When it comes to keeping those cutters locked against every curve and contour of the skull, this shaver easily gets a 10 out of 10 from me.
Comfort
The blades on the PX5 are remarkably soft on the scalp, and I didn’t experience any irritation or discomfort while shaving.
- Zero Tugging or Redness: The cutting elements glide smoothly over the head and neck without pulling hairs or causing post-shave razor burn.
- Daily Shaving: It’s gentle enough that I can comfortably run it over my head every single day without building up skin sensitivity.
Speed and Closeness
Speed and convenience are what these dedicated head shavers are all about, rather than delivering a razor-smooth finish. When I use the PX5 daily or every other day, it takes roughly two minutes to finish a full head shave—it really doesn’t get much quicker than that!
If you let your hair grow for three or more days, expect it to take significantly longer, as these rotary heads simply aren’t designed to tackle longer stubble.
- The Closeness Reality: Closeness is not perfect. You’ll still get a mild “sandpaper” or “cat’s tongue” feel around the sides of your head where the hair recedes, and it won’t match the baby-smooth finish of a manual razor.
- Facial Shavers vs. Head Shavers: If absolute closeness is your top priority, high-end facial shavers like the Braun Series 9 Pro or Panasonic Arc 5 will give you a closer result, but they lack the ergonomic advantages (plus larger blade span) that make dedicated head shavers so convenient.
Wet Shaving
You have the option to shave with the PX5 using a shaving lubricant of your choice, like a gel, cream, or soap. I’ve tested wet shaving with it myself, but I don’t personally get much benefit from it; if I’m going to take the extra time to apply shave cream, I usually end up feeling like I might as well just use a manual razor.
That said, some guys do notice a bit more comfort and a slightly closer result when using a Skull Shaver wet with a lubricant, and others simply prefer shaving in the shower. So, the option to wet shave is right there if you want it.
Gold GX5 vs Platinum PX5: Is the Extra $$$ Worth It?
The price difference between the Pitbull Gold GX5 (around $120 USD) and the Platinum PX5 (around $200 USD) is significant. The core cutting mechanism, blade compatibility, and motor output on both shavers are practically identical.

Here is what you get for that extra $80 on the Platinum PX5:
- Rinse Stand: You get a dedicated cleaning/rinse stand.
- Travel Lock: The Platinum features an integrated digital travel lock.
- Chrome Finish: The Platinum features an attractive chrome coating over the plastic casing. It looks more premium on the counter, though it is a coating rather than solid metal.
- Accessories & Warranty: You get the roomier travel case. In the USA, the Platinum carries a 2-year warranty versus 1 year on the Gold (outside the US, both get 2 years).
My Take: I generally recommend the Skull Shaver Pitbull Gold over the Platinum. In my experience, paying an extra $80 for the chrome look, stand, case, and travel lock is not worth it for most guys. The Gold gives you the exact same shave for much less money.
Final Thoughts – Who’s It Best For?
Was I happy with the shave? Yes, absolutely. It gave comfortable, clean shaves that were close enough for a dedicated rotary head shaver, with zero skin irritation on my neck or head.
Is it $200 ideal? Not for me.
At $200, the Platinum PX5 is very expensive. While the shiny chrome appearance, included rinse stand, roomier travel case, travel lock, and IPX7 waterproofing are nice additions, the actual shaving performance is identical to the cheaper models in Skull Shaver’s lineup. Most guys will be much better off choosing the Skull Shaver Pitbull Gold GX5 at around $120, or even looking at the Pitbull Silver Pro PX5 or Palm MX5 models.
However, if you dont mind splashing out a bit for the additional accessories and like what the PX5 offers, then go for it.
If you aren’t sure which shaver fits your needs best, check out my updated Best Electric Head Shavers Roundup to see my top recommendations currently.
